塑胶地板,PVC地板资料及技术指标vinyl flooring specification

pvc地板|运动地板|防滑地板

宝丽龙星彩系列PVC地板

时间:2015-04-16 16:43来源:未知 作者:nengneng 点击:
BL-9801 BL-9802 BL-9803 BL-9804 BL-9805 BL-9806 BL-9807 BL-9808 BL-9809 BL-9810 BL-9811 BL-9812 BL-9813 BL-9815 BL-9816 BL-9818 BL-9819 BL-9820 BL-9821 BL-9822


Dimension:2.1mm*2m*20m/0.4mm(耐磨层)
重量:2000g/m2
颜色选择:20

总厚度为2.0mm,有20余款清新自然的花色可供选择,产品表面经过UV处理,
保证了低廉的保养成本。
适合于:高人流量的商用和工业用区域,包括医疗系统、教育机构、办公室、商场、
工厂等等。

BL-9801

BL-9802

BL-9803
BL-9804 BL-9805

BL-9806
BL-9807 BL-9808 BL-9809 BL-9810
BL-9811 BL-9812 BL-9813 BL-9815 BL-9816
BL-9818 BL-9819 BL-9820 BL-9821 BL-9822





地板施工与保养指导:
Construction & Maintenance instructions
一.基层要求
1.       基层地面含水率应小于8%,地下室及潮湿地面应做防水处理。
The moisture content of the base layer should be less than 8%while waterproof treatment
Should be done on the basement and humidsurface.                                         
2.       基层表面硬度应大于1.2MPa,基层平整度2m直尺误差不超2mm。
The hardness of the base layer should be larger than 1.2Mpa,the error for the base flatness
(2m straight scale)shouldn’t be more than 2mm..
 
二.铺装指南(installation instruction)
1.       自流平必须在施工结束后12小时后进行打磨。
Auto-flowing mortar should be polished within 12h after the completion of the construction.
2.       铺装前整卷地材需全部展开放平,待2-3小时后才能使用,一边卷材尺寸完全稳定及消除卷曲引起的起伏。
Before the installation,the material should be kept unfolded for 2-3hours so that the material
can be stable.
3.       粘贴完成后应用圆角木板将地板表面完全刮平,不得出现表面气泡。
After sticking,the surface of the floor should be treated by using rounded board without surface
bubbles.
4.       施工结束24小时后,不得进入施工场所。
No one should be allowed to enter into the construction site within 24h after the construction.
 
三.使用及保养(Usage and maintenance)
1.       pvc塑胶地板应避免锐器在地板表面勾画及重物拖拉。
Avoid scratching by sharp instruction or dragging heavy objects on the PVC plastic floor.
2.       请勿将强酸强碱等腐蚀物质置于地板表面。
Don’t place acid,alkail and other corrosive substances on the surface of the floor.
3.       日常保养可使用拧干水分的拖把清洁,顽固污渍可用去污剂协助清洁。
The mop without moisture can be used for daiy mainteance clean,the detergents can be used
to remove stubbom stains.
4.       定期打蜡上光。
 
尺寸稳定:采用特殊纤维处理。
Dinmension stability:Adopting the special fiber treatment.
健康环保:安全无毒不产生甲醛
Health:Safe anf no poisons ,no formaldehyde produced.
极佳耐污性:容易清洗
Excellent stain resistance and easy cleaning.
经济:高档的效果,中档产品的价格
Economy:Superior,effect low price.
超强耐磨:采用高厚度耐磨层
Excellent durability wear resistance:Adopting the thick wear layer.
吸音性能极佳。
Good sound insulation.


JLS4001 JLS4002 JLS4003 JLS4004 JLS4005
JLS4006 JLS4007 JLS4008 JLS4009 JLS4010


技术参数 Technical Data                             
总厚度Total Thickness  1.6mm 1.8mm 2.0mm 2.6mm(F) 3.0mm(F)
耐磨层厚度wear layer thickness 0.2mm 0.2mm 0.4mm 0.5mm 0.7mm
重量weight 2400g/m2 2600g/m2 2900g/m2 2500g/m2 2800g/m2
卷宽roll width 2.0m 2.0m 2.0m 2.0m 2.0m
 卷长roll length 20m 20m 20m 20m 20m